Faculty

Personal profile

Bo Yang
Associate Chair, Professor, Ph.D
School of Civil Engineering, Chongqing University, Chongqing, 400045, China
Email: yang0206@cqu.edu.cn


Education
PH.D., May 2013,Nanyang Technological University
M.E., July 2008, Chongqing University
B.S., July 2005, Chongqing University

Career Details
Professor, Chongqing University (Sep. 2013–now)
Project officer & Research Fellow, Nanyang Technological University (Aug. 2012 – Sep. 2013)

Research interests
Robustness of Steel and Composite Structures
High performance steel structures

Research Projects
National Natural Science Foundation of China (No. 51408077), Three-dimensional Effect Study of Steel Frame-Composite Floor Structures against Progressive Collapse (PI, Jan 2015 - Dec 2017)

Fundamental and Frontier Research Project of Chongqing (No. cstc2015jcyjBX0024): Domino collapse mechanism study considering falling floor impact effect about composite frame structures (Principal Investigator, Jan 2016-Dec 2018)

Latest Publications
[1].Minhao Dong, Mohamed Elchalakani, Ali Karrech, Mostafa Fahmi Hassanein, Tianyu Xie, Bo Yang*, Behaviour and Design of Rubberised Concrete Filled Steel Tubes under Combined Loading Conditions, Thin-Walled Structures, 139(6), 24-38, 2019.
[2].Elchalakani Mohamed, Dong Minhao, Karrech A., Li G., Ali M. S. Mohamed, Yang Bo*, Experimental investigation of rectangular air cured geopolymer concrete columns reinforced with GFRP bars and stirrups, Journal of Composites for Construction-ASCE, 23(3), 04019011, 2019.
[3].Bo Yang, Yue Zhang, Gang Xiong, Elchalakani Mohamed, Shao-Bo Kang*, Global buckling investigation on laterally-unrestrained Q460GJ steel beams under three-point bending, Engineering Structures, 181(4), 271-280, 2019.
[4].Shu-Chao Lin, Bo Yang, Shao-Bo Kang, Shao-Qian Xu, A new method for progressive collapse analysis of steel frames, Journal of Constructional Steel Research, 153(3), 71-84, 2019.
[5].Bo Yang, Yong Yang, Xu-Hong Zhou, Qiang-Fu Jiang, Shao-Bo Kang, Component tests and numerical simulations of composite floor systems under progressive collapse, Journal of Constructional Steel Research, 151(12), 25-40, 2018.
[6].Elchalakani Mohamed, Dong Minhao, Karrech A., Li G., Ali M. S. Mohamed, Xie T., Yang Bo*, Development of Fly Ash and Slag Based Geopolymer Concrete with 
Calcium Carbonate or Microsilica, Journal of Materials in Civil Engineering-ASCE, 30(12), 04018325, 2018.
[7].Fu Qiu Ni, Tan Kang Hai*, Zhou Xu-Hong and Yang Bo, A mechanical model of composite floor systems under an internal column removal scenario, Engineering Structures, 175(22), 50-62, 2018.
[8].Fu Qiu Ni, Tan Kang Hai, Zhou Xu-Hong and Yang Bo*, Three-Dimensional Composite Floor Systems under Column-Removal Scenarios, Journal of Structural Engineering-ASCE, 144(10), 04018196, 2018.
[9].Xu M., Gao S., Yang Bo, Peng Z., Study on seismic behavior of angle steel connection joints for concrete-filled square steel tubular column, Ingegneria Sismica, 35(3), 139-162, 2018.
[10].Nie Shidong, Zhu Qian, Yang Bo, Li Pengcheng*, Investigation of residual stresses in Q460GJ steel plates from medium-walled box sections, Journal of Constructional Steel Research, 148(9), 728-740, 2018.
[11].Elchalakani Mohamed, Hassanein M.F., Karrech Ali, Yang Bo*, Experimental investigation of rubberised concrete-filled double skin square tubular columns under axial compression, Engineering Structures, 171(18), 730-746, 2018.
[12].Mohamed Elchalakani, M.F. Hassanein, Ali Karrech, Sabrina Fawzia, Bo Yang*, V.I. Patel, Experimental tests and design of rubberised concrete-filled double skin circular tubular short columns, Structures, 15(3), 196-210, 2018.
[13].Yang Bo, Wang Hao, Yang Yong, Kang Shao-Bo, Zhou Xu-Hong and Wang Lin, Numerical study of rigid steel beam-column joints under impact loading, Journal of Constructional Steel Research, 147(8), 62-73, 2018.
[14].Hassanein M.F., Elchalakani Mohamed*, Karrech A., Patel V.I., Yang Bo* , Behaviour of Concrete-filled Double-skin Short Columns Under Compression Through Finite Element Modelling: SHS Outer and SHS Inner Tubes, Structures, 14 (2), 358-375, 2018.
[15].Elchalakani Mohamed, Karrech Ali, Dong Minhao, M.S. Mohamed Ali and Yang Bo*, Experiments and Finite Element Analysis of GFRP Reinforced Geopolymer Concrete Rectangular Columns Subjected to Concentric and Eccentric Axial Loading, Structures, 14 (2), 273-289, 2018.
[16].Yang Bo, Zhu Qian, Nie Shidong*, Elchalakani Mohamed, and Xiong Gang, Experimental and model investigation on residual stresses in Q460GJ thick-walled I-shaped sections, Journal of Constructional Steel Research, 145(5), 489-503, 2018.
[17].Kang Shao-Bo, Yang Bo, Elchalakani Mohamed, Xiong Gang*, Global Buckling of Laterally-Unrestrained Q460GJ Beams with Singly Symmetric I-Sections, Journal of Constructional Steel Research, 145(5), 341-351, 2018.
[18].Yang Bo, Shen Le, Kang Shao-Bo, Elchalakani Mohamed and Nie Shi-Dong*, Load bearing capacity of welded Q460GJ steel H-columns under eccentric compression, Journal of Constructional Steel Research, 143(3), 320-330, 2018.
[19].Kang Shao-Bo, Yang Bo, Zhou Xiong and Nie Shi-Dong*, Global buckling behaviour of welded Q460GJ steel box columns under axial compression, Journal of Constructional Steel Research, 140(1), 153-162, 2018.
[20].Kang Shao-Bo, Tan Kang Hai, Liu Hui-Yuan, Zhou Xu-Hong, Yang Bo*, Effect of boundary conditions on the behaviour of composite frames against progressive collapse, Journal of Constructional Steel Research, 138(11), 150-167, 2017.
[21].Fu Qiu Ni, Tan Kang Hai, Zhou Xu-Hong and Yang Bo*, Load-resisting mechanisms of 3D composite floor systems under internal column-removal scenario, Engineering Structures, 148(20), 357-372, 2017.
[22].Fu Qiu Ni, Tan Kang Hai, Zhou Xu-Hong and Yang Bo*, Numerical simulations of three-dimensional composite structural systems against progressive collapse, Journal of Constructional Steel Research, 135(8), 125-136, 2017.
[23].Kang Shao-Bo, Tan Kang Hai, Zhou Xu-Hong, and Yang Bo*. Experimental investigation on shear strength of engineered cementitious composites. Engineering Structures, 143(14): 141-151, 2017.
[24].Nie Shi-Dong, Kang Shao-Bo, Shen Le and Yang Bo*. Experimental and numerical study on global buckling of Q460GJ steel box columns under eccentric compression. Engineering Structures, 142(13), 211-222, 2017.
[25].Kang Shao-Bo, Tan Kang Hai, Zhou Xu-Hong and Yang Bo*. Influence of reinforcement ratio on tension stiffening of reinforced engineered cementitious composites. Engineering Structures, 141(12), 251-262, 2017.
[26].Yang Bo, Kang Shao-Bo, Xiong Gang* Nie Shidong, Hu Ying, Wang Saibo, Bai Jubo, Dai Guoxin, Experimental and Numerical Study on Lateral-Torsional Buckling of Singly Symmetric Q460GJ Steel I-Shaped Beams, Thin-walled Structures. 113(4), 205-216, 2017.
[27].Yang Bo, Nie S.D., Kang Shao-Bo, Xiong Gang* et.al, Residual stress measurement on welded Q345GJ steel h-sections by sectioning method and method improvement, Advanced Steel Construction, 11(1), 2017.
[28].Elchalakani Mohamed, Karrech Ali, Hassanein M.F., Yang Bo, Plastic and yield slenderness limits for circular concrete filled tubes subjected to static pure bending. Thin-walled Structures, 109(12), 50-64, 2016.
[29].Hu Ying, Zhao Peng Fei, Yang Bo, Dai Guo Xin, Numerical Study on Temperature Distribution of High-strength Concrete-filled Steel Tubes Subjected to a Fire, International Journal of Steel Structures, 16(4), 1057-1069, 2016.
[30].Hu Ying, Shen Le, Nie Shidong, Yang Bo and Sha W., FE simulation and experimental tests of high-strength structural bolts under tension. Journal of Constructional Steel Research, 126(11), 174-186, 2016.
[31].Xiong Gang, Kang Shao-Bo, Yang Bo*, Wang Saibo, Bai Jubo, Nie Shidong, Hu Ying, Dai, Guoxin, Experimental and numerical studies on lateral torsional buckling of welded Q460GJ structural steel beams, Engineering Structures, 126(23), 1-14, 2016.
[32].Wang Hao, Yang Bo*, Zhou Xu-Hong and Kang Shao-Bo, Numerical analyses on steel beams with fin-plate connections subjected to impact loads, Journal of Constructional Steel Research, 124(9), 101-112, 2016.
[33].Yang Bo, Nie Shi Dong, Xiong Gang* Hu Ying, Bai Jubo, Zhang Weifu, Dai Guoxin, Residual stresses in welded I-shaped sections fabricated from Q460GJ structural steel plates, Journal of Constructional Steel Research, 122(7), 261-273, 2016.
[34].Yang Bo, Tan Kang Hai, Xiong Gang and Nie S.D.*, Experimental study about composite frames under an internal column-removal scenario, Journal of Constructional Steel Research, 121(6), 341-351, 2016.
[35].Fu Qiuni, Yang Bo*, Hu Ying, Xiong Gang, Nie Shidong, Zhang Weifu, Dai Guoxin, Dynamic analyses of bolted-angle steel joints against progressive collapse based on component-based model, Journal of Constructional Steel Research, 117(2), 161-174, 2016.
[36].Yang Bo, Xiong Gang, Ding Kang, Nie Shidong, Zhang Weifu, Hu Ying, Dai Guoxin, Experimental and numerical studies on lateral torsional buckling of GJ structural steel beams under a concentrated loading condition, International Journal of Structural Stability and Dynamics, 16(1), 1640004, 2016.
[37].Yang Bo, Tan Kang Hai and Xiong Gang, Behaviour of composite beam–column joints under a middle-column-removal scenario: Component-based modelling, Journal of Constructional Steel Research, 104(1), 137-154, 2015.
[38].Yang Bo* and Tan Kang Hai, Behaviour of composite beam-column joints under a middle-column-removal scenario: experimental tests, Journal of Structural Engineering-ASCE, 140(2), 04013045, 2014.
[39].Yang Bo* and Tan Kang Hai, Robustness of steel angle connections against progressive collapse: Mechanical modelling of bolted-angle connections under tension, Engineering Structures, 57(12), 153-168, 2013.
[40].Yang Bo* and Tan Kang Hai, Robustness of bolted-angle connections against progressive collapse: Experimental tests of beam-column joints and development of component-based models, Journal of Structural Engineering-ASCE, 139(9), 1498-1514, 2013.
[41]. Yang Bo* and Tan Kang Hai, Experimental tests of different types of bolted steel beam-column joints under a central-column-removal scenario, Engineering Structures, 54(9), 112-130, 2013.
[42]. Yang Bo* and Tan Kang Hai, Numerical analyses of steel beam-column joints subjected to catenary action, Journal of Constructional Steel Research, 70(3), 1-11, 2012.