[Structural Engineering]

Yu Guan, Xuhong Zhou, Yu Shi^※, Xinmei Yao. Prediction of the in-plane mid-span displacement of cold-formed steel floor with steel form-deck and gypsum-based self-leveling underlayment[J]. Journal of Constructional Steel Research, 2019, 160:124–135.

Keywords: Cold-formed steel; Floor system; In-plane displacement; Experimental investigation; Theoretical method

Highlights:

The calculation method of the mid-span in-plane displacement of composite floors were proposed.

Cyclic shear tests on floors were conducted to investigate the in-plane displacement.

The validity of the proposed methodology was verified against the test results.

The floor analysis model was simplified to a nonlinear diagonal spring model.

The simplified model was verified through ABAQUS finite element analysis.

Abstract:

Cold-formed steel composite floor systems have been widely used in cold-formed steel framing for mid-rise building construction, primarily owing to its structural and economic efficiency. The composite floors consist of cold-formed steel C-shape joists and subfloor with cold-formed steel form-deck and gypsum-based self-leveling underlayment. This paper presents a theoretical method, an experimental investigation, and a simplified model analysis on the in-plane displacement of cold-formed steel composite floors under horizontal loads. Based on the design method of timber floors, the calculation methodology of the mid-span in-plane displacement of cold-formed steel floor with steel form-deck and gypsum-based self-leveling underlayment is proposed. Subsequently, cyclic shear tests of two full-scale floors with and without gypsum-based self-leveling underlayment were executed to investigate the failure mode, load bearing capacity, and in-plane displacement. The test results indicated that the primary failure mode of the specimens was the shear failure of self-drilling screws that connected the steel form-deck and end joists. Furthermore, the in-plane displacement of the test results agreed well with that of the proposed method. Finally, referring to the deformation results of floors under different loading stages, the composite floor analysis model was simplified to a nonlinear diagonal spring model according to the method of equivalent in-plane stiffness, and it was verified through ABAQUS finite element analysis. This study provides a useful design basis for the design and application of cold-formed steel composite floors.

Resource:

https://www.sciencedirect.com/science/article/pii/S0143974X1831318X